Supero FatTwin F517H6-FT User Manual page 70

FatTwin F517H6-FT USER'S MANUAL
RT3 (J31)
RT3 on location J31 is used to monitor
the hard disk drive temperature. Please
attach the appropriate monitoring cable
to this header.
Unit Identifi er Switch
A Unit Identifier switch (SW1) and
a UID LED Indicator are located on
the motherboard. The UID switch is
located next to the power switch on the
backplane. The UID LED (UID_LED1)
is located next to the UID switch. When
you press the UID switch, the UID LED
Indicator will be turned on. Press the UID
switch again to turn off the UID LED. The
UID Indicator provides easy identifi cation
of a system unit that may be in need of
service.
Note: UID can also be triggered via
IPMI on the motherboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on our
Website @ http://www.supermicro.com.
Video Connection
A Video (VGA) port is located next to the
LAN Port 2 on the I/O backplane. Refer
to the layout below for the location.
Power Switch
A power switch (PWR_SW1) is located
next to the VGA port on the motherboard.
Refer to the layout below for the location.
Pin Defi nitions
Pin#
1
2
UID Switch (SW1)
Pin Defi nitions
Pin#
1
2
3
4
UID LED (UID_LED1)
Color/State OS
Blue: On Windows OS
Blue: Linux OS
Blinking
5-18
RT3 (J31)
Defi nition
TP
TN
Defi nition
Ground
Ground
Button In
Ground
Status
Status
Unit Identifi ed
Unit Identifi ed