Table of Contents
Advertisement
The options for Serial Port 4 are Auto, (IO=2E0h; IRQ=4), (IO=3F0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12), (IO=3E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), and (IO=3D0h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12).
Hardware Health Configuration
PC Health Status
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select "Full Speed" to allow the onboard fans to run at full speed
(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting
is recommended for special system configuration or debugging. Select "Standard"
for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the
needs between system cooling and power saving. This setting is recommended for
regular systems with normal hardware configurations. The options are Full Speed
(@100% of PWM Cycle), Standard (@50% of PWM Cycle), Heavy I/O, and PUE
(Power Usage Efficiency).
The following items will be displayed:
•
Peripheral Temperature
•
Fan 1 Speed
•
Fan 2 Speed
•
3VCC
•
AVCC
•
VSB3v
•
VBAT
Serial Port Console Redirection
COM0
Use this feature to enable console redirection for the COM0 port. The options are
Enabled and Disabled.
5-11
Chapter 5: BIOS
Advertisement
Table of Contents
