Table of Contents
Advertisement
Chassis Installation
Installing the Chassis into a Rack (Figure 2-4)
1. Confi rm that the rails are correctly installed on the rack.
2. Align the guides on the chassis with the front of the rails.
3. Slide the guides of the chassis into the rails, keeping the pressure even on
both sides, until the locking tabs click into place, securing chassis in a fully
extended position.
4. Simultaneously depress the locking tabs of both rails at the same time and
push the chassis all the way into the rack.
5. If necessary, use screws to secure the chassis handles to the front of the
rack.
Note: The fi gure above is for illustration purposes only. Always install servers to
the bottom of the rack fi rst.
Figure 2-4: Installing into a Rack
2-7
Chapter 2: Server Installation
Advertisement
Table of Contents
