Removing The Node Cover - Supero FatTwin F517H6-FT User Manual

FatTwin F517H6-FT USER'S MANUAL
6-5

Removing the Node Cover

Each node has a removable cover which will permit access to the nodes components.
Removing the Node Cover
1. Remove the power cord from the rear of the node as described in Section 6-3
and remove the node from the chassis as described in Section 6-4. Place the
node on a fl at, stable surface.
2. Remove the six screws securing the cover to the node, as illustrated above.
3. Lift the cover up and off the node.
Figure 6-2: Removing the Node Cover
6-4