Installing The Rails On A Rack - Supero FatTwin F517H6-FT User Manual

FatTwin F517H6-FT USER'S MANUAL

Installing the Rails on a Rack

Installing the Rails (Figure 2-3)
1. Adjust the length of both rails as described on the previous page.
2. Hang the hooks of the front of the outer rail onto the slots on the front of the
rack. Secure the front of the outer rail to the rack with two screws.
3. Pull out the rear of the inner rail, adjusting the length until it fi ts within the
posts of the rack.
4. Hang the hooks of the rear portion of the inner rail onto the slots on the rear
of the rack. Secure the rear of the outer rail to the rear of the rack with two
screws.
5. Repeat steps 1-4 for the remaining rail.
Figure 2-3: Attaching the Rails to a Rack
2-6