Removing Memory Modules; Memory Support; Memory Population Guidelines - Supero FatTwin F517H6-FT User Manual

Removing Memory Modules

Press both notches on the ends of the DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the memory slot.

Memory Support

The X9SCFF-F motherboard supports up to 32 GB of 240-pin Unbuffered (UDIMM)
ECC/Non-ECC DDR3-1600/1333 MHz speed 4-channel memory in four (4) DIMM
slots.
Note: For the latest CPU/memory updates, please refer to our website at
http://www.supermicro.com/products/motherboard.
DIMMB1 Slot DIMMB2 Slot
2GB DIMM 2GB DIMM
2GB DIMM 2GB DIMM
4GB DIMM 4GB DIMM
4GB DIMM 4GB DIMM
8GB DIMM 8GB DIMM
8GB DIMM 8GB DIMM

Memory Population Guidelines

•
Always use DDR3 DIMM modules of the same size, type and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed
of the slowest DIMM.
•
The motherboard will support one DIMM module or three DIMM modules
installed. For best memory performance, install DIMM modules in pairs.
Recommended Population (Balanced)
DIMMA1 Slot
2GB DIMM
4GB DIMM
8GB DIMM
5-11
Chapter 5: Advanced Motherboard Setup
DIMMA2 Slot
2GB DIMM
4GB DIMM
8GB DIMM
Total System
Memory
4GB
8GB
8GB
16GB
16GB
32GB