Serial Port Console Redirection; Console Redirection Settings - Supero SUPERSERVER 6027B-TLF User Manual

S S
UPER ERVER 6027B-TLF User's Manual
Serial Port 2 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address of
Serial Port 1. Select Disabled to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port becomes unavailable.
The options are Auto, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12; and IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL (Serial
Over LAN), and COM.

Serial Port Console Redirection

COM 1/COM 2
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled,
and for COM2 is Enabled.

Console Redirection Settings

This feature allows the user to specify how the host computer will exchange data
with the client computer, which is the remote computer used by the user.
7-20