Http://Splitoff.ru/Tehn-Doc.html - Daikin VRV System R-22 PLUS Series Manual

Si33-102.book Page 90 Tuesday, June 26, 2001 3:18 PM
Test Operation
BRC7C(4C) Type Group No. setting by infrared remote for centralized control
(BRC4C Type :
1. When in the normal mode, push
without auto swing) "field set mode."
2. Set mode No. "00" with
3. Set the group No. for each group with
4. Enter the selected group numbers by pushing
5. Push
BRC7C (4C) Type
Group No. Setting
Example
Indoor/Outdoor Outdoor/Outdoor
F1 F2 F1 F2
F1 F2 P1 P2
RC
1-00
F1 F2 P1 P2
No Remote Control
1-03
If you have to set the address for each unit for calculating cost, etc., set the mode No. to "30."
Caution When turning the power supply on, the unit may often not accept any operation while "88" is displaying
after all indications were displayed once for about 1 minute on the liquid crystal display.
This is not an operative fault.
90
button for 4 seconds or more, and operation then enters the
button.
button (advance/backward).
button.
button and return to the normal mode.
Indoor/Outdoor Outdoor/Outdoor
F1 F2 F1 F2
F1 F2 P1 P2 F1 F2 P1 P2
RC RC RC
Main Sub
1-02
1-01
F1 F2 P1 P2 F1 F2 P1 P2
RC
1-04

: http://splitoff.ru/tehn-doc.html

SiE33-102
Central Remote
Control
F1 F2
F1 F2 P1 P2
Group Control by Remote Control
(automatic unit address)
F1 F2 P1 P2
(V1567)
General Information