Centralized Control Group No. Setting - Daikin VRV System R-22 PLUS Series Manual

Si33-102.book Page 89 Tuesday, June 26, 2001 3:18 PM
SiE33-102

4.13 Centralized Control Group No. Setting

BRC1A51·52 If carrying out centralized control by central remote control or unified ON/OFF control, group No. must
be set for each group individually by remote control.
Group No. setting by remote control for centralized control
1. When in the normal mode, push the
the "field setting mode."
2. Set mode No. "00" with the
3. Push the
4. Set the group No. for each group with the
1-01, ...,1-15, 2-00,...4-15. However, the unified ON/OFF control displays only the group No. within
the range selected by the switch for setting each address.)
5. Push the timer
6. Push the
Even if not using a remote control, connect the remote control when setting the group No., set the group
No. for centralized control, and disconnect after making the setting.
Set the group No. after turning on the power supply for the central remote control, unified ON/OFF
control, and indoor unit.
BRC7A Type
Group No. setting by infrared remote for centralized control
1. When in the normal mode, push
"field set mode."
2. Set mode No. "00" with
3. Set the group No. for each group with
4. Enter the selected group numbers by pushing
5. Push
BRC7A Type
General Information
button for 4 seconds or more, and operation then enters
button. ∗
button to inspect the group No. display.
button (The group No. increases in the manner of 1-00,
button to define the selected group No.
button to return to the normal mode.
button for 4 seconds or more, and operation then enters the
button.
button.
button and return to the normal mode.
: http://splitoff.ru/tehn-doc.html
Test Operation
button (advance/backward).
89