Http://Splitoff.ru/Tehn-Doc.html - Daikin VRV System R-22 PLUS Series Manual

Si33-102.book Page 67 Tuesday, June 26, 2001 3:18 PM
SiE33-102
4.4.1 Setting Mode 1
Cool/heat selection setting
(SS1)
C/H SELECT
MODE TEST
IND MAIN
H1P H2P H3P H4P
SET
Change cool/heat
selection to MAIN.
C/H SELECT
SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
H1P H2P H3P H4P H5P H6P H7P
Change low noise operation to "ON".
External control adaptor for outdoor unit is required
if low noise operation is set to "ON".
Change sequential start to "OFF".
Setting complete
GROUP MAIN (cool/heat selection),
ON (low noise), OFF (sequential start)
MODE
Monitor mode
Note: External control adaptor for outdoor unit is required if cool/heat selection set to MAIN or SUB, or if low
noise operation is set to ON.
General Information
If carried out from the indoor unit remote control:
IN/D OUT/D
C/H
UNIT UNIT
SELECT
SS1
(Factory set)
The factory settings are:
SEQ. Individual (C/H SELECT), OFF (L.N.O.P.), ON (SEQ. START)
L.N.O.P.
START
SUB
You can change the cool/heat selection permission, low noise and
sequential start settings by pushing the SET switch.
H5P H6P H7P
To skip settings you don't want to change, push the RETURN switch
and go to the next setting.
An optional adaptor for outside control of outdoor units is required
if you have set cool/heat selection to MAIN or SUB.
C/H SELECT
SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
SET
H1P H2P H3P H4P H5P H6P H7P
RETURN
C/H SELECT SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
H1P H2P H3P H4P H5P H6P H7P
C/H SELECT SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
H1P H2P H3P H4P H5P H6P H7P
RETURN
C/H SELECT
SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
H1P H2P H3P H4P H5P H6P H7P

: http://splitoff.ru/tehn-doc.html

Test Operation
If carried out from the cool/heat selector:
IN/D OUT/D
H/C
UNIT UNIT
SELECT
SS1
SET
C/H SELECT
SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
SET
H1P H2P H3P H4P H5P H6P H7P
SET
C/H SELECT SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
SET
H1P H2P H3P H4P H5P H6P H7P
RETURN
SET
C/H SELECT SEQ.
MODE TEST L.N.O.P.
START
IND MAIN SUB
SET
H1P H2P H3P H4P H5P H6P H7P
Push and hold for 5 sec.
MODE
Setting mode 2
(V1552)
67