Door Setting - IDTECK ITDC ITDCSR EIO88 User Manual

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

8.3 DOOR SETTING

First, you have to configure "How many doors you want to control by iTDC" and this set-up is very
important, as the iTDC will automatically configure the Input sources and Output Relays upon to the
number of doors to be controlled by iTDC. Press <F2> key once then press <6> key or <4> key until the
LCD shows [DOOR SETTING] in the [SETUP MENU F2] then press <ENT> key to change the DOOR
SETTING. Please follow the steps below for DOOR SETTING and it shows the procedure for 4 DOOR
setting. The Master ID for iTDC-SR is 10 digits number (Default setting "0000000000").
STAR iTDC [F1]
Initial LCD Display
DOOR SETTING
DOOR SETTING
2 Door Setting
Confirm the Reader locations as shown on the table below.
3 Door Setting
Confirm the Reader and Exit Button locations as shown on the table below.
101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)
"MASTER ID" + <ENT>
8 times <0> + <ENT>
<ENT>
<ENT>
: After Master ID change
Initial Master ID
:
Entry
Door1 Reader #1
Door2 Reader #3
Entry
Door1 Reader #1
Door2 Reader #3
Door3 Reader #4
Press <F2> + 7times <6>
Select [
DOOR SETTING]
DOOR SETTING
DOOR
4 DOOR Setting Completed
Exit
Reader #2
Reader #4
Exit
Reader #2
EXIT Button
EXIT Button
-33-
+ <ENT>
<4> or
<6>
Users Manual