Basic Settings; Initialization Of Itdc; How To Enter The Setup Menu - IDTECK ITDC ITDCSR EIO88 User Manual

Hide thumbs Also See for ITDC ITDCSR EIO88:

Table of Contents

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

BASIC SETTINGS

Note !!! You have to connect optional LCD display and Keypad to iTDC for the following manual settings.

After the all installation and connections are completed, power up the iTDC then press the two

Initialisation Switches simultaneously. The LCD will first display "System Initialising..." After the all

Initialisation process is completed then the LCD will display "Initialise END Turn OFF Power." Turn the

power off then turn on again for iTDC running.

System

To set-up or to change the iTDC settings, you have to enter the SETUP MENU first. To do so, press the 8

times <0> key for Master ID (Default setting "00000000") and <ENT> key from the optional Keypad

then you can get into SETUP MENU. There are 4 main SETUP MENU and you first get into [SETUP

MENU F1]. You can move to other SETUP MENU by pressing <F1> key for [SETUP MENU F1],

<F2> key for [SETUP MENU F2], <F3> key for [SETUP MENU F3] and <F4> key for [SETUP

MENU F4]. There are several SUB MENU in the main SETUP MENU and you can scroll up and down

the SUB MENU by pressing <4> and <6> key in the main SETUP MENU. If you don't press any key for

20 seconds or if you press <ESC> key then iTDC will exit the SETUP MENU then return to normal

operation. You can also change the Master ID in the [SETUP MENU F2].

The Master ID for iTDC-SR is 10 times <0> key (Default setting "0000000000").

101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)

Initialize END

-32-

Users Manual

Table of Contents