Dial Up Modem; Tcp/Ip Module (Internal Version) - IDTECK ITDC ITDCSR EIO88 User Manual

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

6.4 DIAL UP MODEM

Please, see the Software manual.

6.5 TCP/IP MODULE (INTERNAL VERSION)

Please, see the Software manual.
6.5.1 Jumper Switch setting (Over iTDC V3.0)
Before the LAN (TCP/IP module) Communication, the jumper switch needs to be setting with the
figure of the below.
Figure
: Jumper Switch location and setting for LAN (TCP/IP module) communication
6.5.2 Multi drop Connection (by TCP/IP internal module)
This uses LAN (TCP/IP) communication between multiple iTDCs and a host computer.
Install the same as <Figure: Multi drop connection (by TCP/IP internal module)>.
Set the jumper switch the same as <Figure: Jumper switch setting for Multi drop connection (by
TCP/IP internal module)>
In this example
Figure: Jumper switch setting for Multi drop connection (by TCP/IP internal module)
101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)
IIM7100(IGM7100)
iTDC #1
NESS - IDTECK iTDC #1 uses IIM7100A.
IIM7100A
iTDC #2 ~ #N
-29- Users Manual