Introduction; Identifying Supplied Parts; About Ness - Idteck Itdc - IDTECK ITDC ITDCSR EIO88 User Manual

Hide thumbs Also See for ITDC ITDCSR EIO88:

Table of Contents

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

2. INTRODUCTION

Please unpack and check the contents of the box. (Optional accessories, if purchased, may be included in

the package)

* Optional Accessories

EIO88 (Expansion I/O Board) – (Ness part No. 101-002)

Keypad (16 keys), LCD Display Module – (Ness part No. 101-003)

TCP/IP Module (IGM7100A) – (Ness part No. 101-124)

The NESS - IDTECK iTDC is an intelligent 2~4 Door Access Controller designed to meet the market

requirements for high security, convenience, and reliability. This user-friendly device allows you to

can be connected with Proximity Readers, Proximity + PIN Readers or biometric fingerprint (or face

recognition) readers. Each reader can have its own operation mode, ether RF only, RF + Password,

fingerprint, RF + fingerprint, RF + PIN + fingerprint. Independent 7 input ports can be connected with

various devices such as Exit Buttons, Door Contact Sensors, PIR Sensors, Window Breakage Sensors and

Fire Sensors to strengthen security. Input/Output ports can be expanded by adding an Expansion I/O

Board. Optional Keypad and LCD Display module can be used to set-up functions manually and

programming inputs and outputs. Using RS232 or RS422 communication, a network system can be set up,

consolidating up to 256 units. All setting values including ID numbers, Inputs/Outputs, Real Time Clock,

Time Schedules and all Event Transaction Reports can be downloaded/uploaded from/to the host

computer with software supporting a variety of reporting formats. NESS - IDTECK iTDC can be installed

and managed inside the security zone for higher security. Experience the ultimate high-level security

access control system with NESS - IDTECK iTDC.

101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)

Main Unit

(1)

Manual

(1)

-5-

Users Manual

Table of Contents