Specification - IDTECK ITDC ITDCSR EIO88 User Manual

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

2.3 SPECIFICATION

CPU
Memory
Power
Card Holders
/ Event Buffers
Reader Ports
Reader Data Format
Communication port
Inputs/Outputs
Self Diagnostic
Reset
Operation Status
Operating Environment
Weight
Dimensions
Optional
Keypad
LCD Display Module
Expansion I/O Board
TCP/IP module
101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)
8bit Microprocessor
Program Memory: 64KB ROM
Data Memory: 512KB RAM (battery backup)
DC 12V/ 350mA max. (Excluding lock current)
User Programmable by 1,000 unit of card holders
Card Holders: 1,000 ~ 50,000 users (Default: 5,000 users)
Event Buffers: 20,000 ~ 29,500 events (Default: 27,500 events)
4 Reader Ports
Standard 26 bits Wiegand Format,
Standard 34 bits Wiegand Format (Applied to iTDC-SR),
8 bits burst Format for keypad reader
RS232/RS422 (up to 256 channels) selectable
4800, 9600(Default), 19200, 38400bps communication speed
7 Input ports/ DC12V/ 20mA
4 Relay Output ports/ DC12V~24V/ FORM-C Relay 2A max.
3 TTL Output ports: DC5V/ 20mA
Optional EIO88 Expansion I/O board (8 Inputs and 8 Output Relays)
Yes
Power on reset and Watchdog timer reset
21 LED (red or green) indicators
0°C ~ +65°C, 0 ~ 90%(Humidity)
250g (0.55 lbs)
185mm x145mm x 18mm (7.4" x 5.8" x 0.72")
16 keys
2Lines x 16ch, 2.62" x 0.55"(65.6mm x 13.8mm) viewing area
EIO88 (8 Input ports/8 Output Relays)
***Required to control doors 3 & 4)***
IIM7100A
-6- Users Manual