Optional Accessories; Eio88 Expansion I/O Board - IDTECK ITDC ITDCSR EIO88 User Manual

Hide thumbs Also See for ITDC ITDCSR EIO88:

Table of Contents

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER

3.3 OPTIONAL ACCESSORIES

(Ness Part No. 101-002)

The EIO88 board features:

- 8 Inputs ports

- 8 FORM-C Relay Output ports

- 4 Inputs can be configured to Door 3 ~ 4 as of exit buttons and door contact sensors.

- 4 Output Relays can be configured to Door 3 ~ 4 as of door locks and alarm devices.

EIO connector

This EIO Connector is the port for connecting to iTDC Main Control board.

BOARD ID S/W

The DIPswitch is factory set as shown on the above layout. DO NOT change the setting as

it may cause wrong operation of EIO88 expansion I/O board.

+12V and GND (Main Power)

This is main power connection of expansion I/O board working at DC12V, max. 100mA current.

101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)

Figure: EIO88 Expansion I/O Board Layout

-12-

Users Manual

Table of Contents