Installation; Instructions For Use - Otto Bock 10S17 Instructions For Use Manual

• Mobile phone GSM 850/GSM 900: 0.99m
• Mobile phone GSM 1800/GSM 1900/UMTS: 0.7m
• DECT cordless phones incl. base station: 0.35m
• WiFi (routers, access points,...): 0.22m
• Bluetooth devices (third-party products not approved by Ottobock): 0.22m
• Do not let foreign particles or liquids get into the device. The Electric Wrist
Rotator should not be subjected to intense smoke, dust, mechanical vibra-
tions, shocks or high temperatures.
• The Electric Wrist Rotator as well as any of its components may be opened
or repaired only by Ottobock specialist staff.
• No liability will be assumed in case of possible damages if the device is
operated incorrectly or used for purposes other than as originally intended.
• The Electric Wrist Rotator may only be operated with the EnergyPack
Li-Ion battery 757B20 or 757B21, the 757B35=* MyoEnergy Integral or
X-ChangePack 757B15.

3 Installation

3.1 Operation with MyoRotronic 13E205
Attach the MyoRotronic according to the Instructions for Use.
3.2 Operation by switch only
Connection pattern
Remove red protective plug and attach plugs numbered 1 and 3 of the Con-
nection Cable 13E50 or the Connection Cable 13E97 with switch to the pins
1 and 3 of the Electric Wrist Rotator.
Attach Battery Connection Cable 13E51=2 or 13E51=4, or possibly, Battery
Connection Cable 13E188=200 or 13E188=600 13E51=2 to the pins 1 of
the Electric Wrist Rotator.
Attach the Electrode Cable 13E129 to the pins 2.
Ottobock | 7