Install The Wall Plate On The Wall - Epson ELPMB62 Installation Manual

B

Install the wall plate on the wall

1. Determine the template sheet position and attach it to the wall.
•
Confirm where the beams or studs are within the wall that can support the projector and wall mount.
•
From the projection distance table, confirm the screen size (S), the distance between the projection
image and wall plate bottom holes (c), and the distance between the projection image and
temporary wall plate hole (d).
•
Align the center line (vertical) of the template sheet with the center line (vertical) of the projection
surface.
•
Align the lines (horizontal) on the template with the height of (c) and (d).
line of template
sheet
line of template
sheet
Center line of
projection surface
If you want to hide the projector power plug under the wall plate cover, make sure the
power outlet is located in the empty space to the left or the right of the wall plate.
2. Drive an M10 screw (not included) into the temporary wall plate hole.
Leave at least 0.2 inch (6 mm) between the screw head and the wall.
35