Epson ELPMB62 Installation Manual page 79

10. Touch each of the four yellow circles on the screen and verify that the gray touch indicators appear in
the correct position.
Finger touch operations may not function correctly if you are wearing bandages,
artificial nails, nail polish, or anything else that may obstruct your fingers.
If the gray indicators do not appear where you touched the screen, you need to manually adjust the
touch unit alignment.
Select Up using the control panel or remote control and press [Enter]. Try touching the four dots again
and repeat this process until the touch indicators appear in the correct position.
11. Perform touch calibration by pressing Menu on the remote control. On the Installation menu, select
Touch Unit, then Touch Calibration. Follow the instructions on the screen.
See the online User's Guide for more details on the touch calibration.
79