Adjust The Angle - Epson ELPMB62 Installation Manual

5. Set Power to On.
The touch unit power turns on and the indicator light turns blue.
Warning
Do not look into the projector's projection window or the touch unit's laser diffusion ports
(located on the bottom of the touch unit); this could cause injury to eyesight.
When Power is set to On, the touch unit automatically powers up the next time the
projector is turned on.
H

Adjust the angle

Adjust the angle of the laser light coming from the touch unit so that the touch unit can detect the
position of your fingers.
Make sure to calibrate the interactive pen(s) before running touch unit setup. Press the
User button on the remote control and select Yes to perform an auto-calibration. Refer
to the online User's Guide for your projector for detailed instructions on calibrating the
pen(s).
75