Route The Cables Through The Wall Mount Arm; Attach The Mount Arm To The Wall Plate - Epson ELPMB62 Installation Manual

D

Route the cables through the wall mount arm

BrightLink 1485 Fi/Fi+: Make sure to route the Touch Unit connection cable through
the wall mount arm. Route the Touch Unit connection cable so that the end that
connects to the Touch Unit appears from the lower part of the wall mount as shown
above.
E

Attach the mount arm to the wall plate

1. Insert the hexagonal shaft into the wall mount (
2. Insert and turn the hexagonal shaft at the top of the mount arm into the slot on the wall plate (
).
38
).