Related Manuals for Epson ELPMB84
Summary of Contents for Epson ELPMB84
- Page 1 User's Guide ELPMB84 Stacking Frame V12H006AW0 Contact details: Web: www.euromet.com Phone: +39 071976444 Email: info@euromet.com...
- Page 2 1. General information and compatibility The ELPMB84 is a stacking frame for EPSON video projectors. The compatible projectors are: EB-PU2213B, EB-PU2113W (13,000 lumen) EB-PU2216B, EB-PU2116W (16,000 lumen) EB-PU2220B, EB-PU2120W (20,000 lumen) and similar. All EB-L1000 Series projectors are also compatible but they require an optional plate (see chapter 11).
- Page 3 List of components included ELPMB84 Stacking Frame, 4x M6 screws, 4x M8 screws Product dimensions 695 x 542 x 281 [mm] Packaging dimensions 780 x 570 x 320 [mm] Material Steel Product weight 9.3 [kg] (excluding feet) Max load 35 [kg] (certified)
- Page 4 Slide the projector into the frame (see below) and align the projector mounting points with the white spacers. Attach to the frame using the screws and washers supplied (005) When using the ELPMB84 with a projector and ultra-short throw (UST) lens, it is necessary to: 2.4.
- Page 5 3. Vertically stacked position It is possible to stack 2x ELPMB84 frames when hanging them and up to a maximum of 3x ELPMB84 frames when on the ground. In order to stack 2 frames, it is necessary to: 3.1. Align the 4 female upper frame pins with the 4 male lower frame pins (006), ensuring they are fully engaged.
- Page 6 4. Portrait projection (floor mounted) The ELPMB84 can be placed vertically on the floor to position it for portrait projection. In order to do this, it is necessary to: 4.1. Insert the 4 threaded feet supplied (010) into the right-hand side of the frame;...
- Page 7 The Euromet 22627 upper/rear bar is an optional accessory that be used for floor and portrait projection from a truss. Please note: Euromet 22627 is only available for ELPMB84 and is not compatible with ELPMB76. The Euromet 22627 is not sold by Epson.
- Page 8 6. Optional portrait adaptor for the ELPMB84 (ELPMB78 V12H006AQ0) The ELPMB78 Portrait Adaptor is an optional accessory that can be used for portrait projection from a traditional horizontal truss. The ELPMB78 Portrait Adaptor is available from Epson. To fasten the bar, it is necessary to: 6.1.
- Page 9 8. Optional clamp fastening (code: Euromet 20977) The Euromet 20977 includes a pair of clamps with a standard 50 mm diameter, including the M10 screw set for the 2x ELPMB84 plate holes (2x male M10 holes with a 300mm distance)
- Page 10 • Once the ELPMB84 frame is secured to the truss, use the 4x ELPMB81 adjustment pins (018) to adjust pitching and rolling. When you have chosen your desired position,...
- Page 11 Fasten the KITE plate with 4x M8 screws and washers • Once the Euromet KITE 21400 has been secured to the ELPMB84 frame, it is also possible stack another ELPMB84 frame (this way both frames are secured to each other, but can be adjusted using the Euromet KITE 21400 precision positioning).
- Page 12 The ELPMB85 has 2 standard fixing points (standard VESA) which are compatible with all Euromet options and Epson projector frames. There is one set of standard fixing points on the "movable" face and another set on the "fixed" face. The fixing points are explained below: •...
- Page 13 10.3. Assembly with the “movable” face (001) To fix the “movable” face to other another product, you have to: 10.3.1. Apply a product equipped with 4 through-holes for M8 screws with standard VESA attachments (the picture shows a simple plate used only for illustrative purposes);...
- Page 14 10.4 Assembly with the “fixed” face (002) To secure the “fixed” face to the ELPMB84 Stacking Frame, you have to: 10.4.1. Use the ratchet wrench to slide the “movable” face until 2 of the 4 holes in the "fixed" face are fully accessible;...
- Page 15 Epson. To secure the projectors, it is necessary to: 11.1. Place the ELPMB84 on and even surface with the base plate turned upwards (as shown in the picture); 11.2. Apply the Euromet 24100 plate (022) so that the smaller flared holes are aligned with the external holes of the 2x ELPMB84 frame bars (the bars without the fastening plate);...