Epson ELPMB62 Installation Manual page 66

Attach the markers to the projection screen as follows:
•
For magnetic screens: Place the bottom of the markers onto the screen with the thinner end of the
marker facing the touch unit.
•
For non-magnetic screens: Use the supplied tape to secure the markers with the thinner side of the
marker facing the touch unit.
Do not place anything other than the markers near the projected image during angle
adjustment. If other objects are on the projected image, angle adjustment may not be
performed correctly.
7. Press the [Enter] button on the remote control or control panel to begin the auto adjustment.
8. When adjustments are complete, remove the markers.
If auto adjustment fails, follow the instructions on the screen to manually adjust the
angle of the laser and run auto adjustment again.
66