Precautions On Installation; Installing The Base Unit On A Wall - Epson ELPWP20 User Manual

Base Unit Placement
Related Links
g
• "Precautions on Installation"
p.25
• "Installing the Base Unit on a Wall"

Precautions on Installation

Note the following precautions when installing the base unit.
Attention
• Note the following points to ensure good wireless performance.
• Do not install the base unit on the top (rear) of a projector suspended from the
ceiling.
• Do not install the base unit behind a large display.
• Use the base unit and the wireless transmitter in a location that is not
obstructed.
• Do not install in a location that exceeds the operating temperature range for the
base unit and the external display device.
• Do not set up the base unit in a location where it might be subjected to vibrations
or shocks.

Installing the Base Unit on a Wall

When installing the base unit on a wall, use the included mount.
p.25
a
Check the installation position, and fix the mount to the wall with
commercially available M4 screws (x4).
Attention
• Fix the screws so that they are not at an angle with respect to the mounting
surface.
• Make sure that the mount is securely installed.
• Do not fix the mount with double-sided tape or magnets.
b
Hook the base unit onto the tabs on the mount.
25