Installation and Assembly: Universal Projector Ceiling Mount Model: ELPMBPJF This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity: 50 lb (22.7 kg) Manufactured by Peerless Industries, Inc. 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com...
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, call Peerless customer care at 1-800-729-0307.
Before you start check the parts list to ensure all of the parts shown are included. Parts List Description Qty. Part Number A projector mount 055-0016 B 4 mm security allen wrench 560-9646 C M5 x .8 x 10 mm socket pin type F screw 520-2031 D #10-32 x 3/8"...
Installation to Extension Column Screw extension column (sold separately) to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). See detail 1.
Installation To Wood Joist Ceilings Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (G) with two #14 x 2.5" (6 mm x 65 mm) wood screws (F) as shown using 3/8" (10 mm) socket wrench. Skip to step 2.
Installation to Concrete Ceilings WARNING • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.
Flush Mount Application Screw projector mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure projector mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1.
Attach adapter plate (L) to projector using one M,N, O screw (M, N, O or P) for each channel as shown. or P Tighten all screws, while keeping the center of gravity. Be sure that adapter plate (L) is straight. Adjust the feet of the channels to keep the adapter plate level.
SCREW IMPORTANT: Allen wrench is your key for projector removal. Store it in a safe place. PROJECTOR Accessories NOTE: All accessories are available for purchase through Epson (www.epson.com) ELPMBP02 ELPMBP01 False Ceiling Plate Kit Adjustable Suspended Ceiling Channel Kit • Replaces a 2' x 2' ceiling tile and mounts to •...
Need help?
Do you have a question about the ELPMBPJF - Universal Projector Ceiling Mount and is the answer not in the manual?
Questions and answers