Install The Pen Stand - Epson ELPMB62 Installation Manual

G

Install the pen stand

You can secure the pen stand with commercially-available M4 screws (not included) or the attached
magnets.
1. Secure the pen stand:
•
If your whiteboard is magnetic, you can use the magnets on the back of the pen stand to secure it.
You need to leave a gap of at least 3.9 inches (100 mm) between the pen stand and the
left or right side of the projected image or the touch feature may not function
properly. If you are unable to leave this gap, install the pen stand on the wall next to
the whiteboard.
•
If you don't have a magnetic whiteboard or are unable to fit the pen stand on the whiteboard with the
proper gap around the projected image, use commercially-available M4 screws (not included) to
secure it to the wall.
2. Attach the pen stand cover.
84