Epson ELPMB62 Installation Manual page 4

Hide thumbs Also See for ELPMB62:
Table of Contents

Advertisement

Warning
Do not apply optical devices such as a magnifying glass or telescope to the laser light diffused from the
touch unit.
If such optical devices are applied, it could cause personal injury or fire.
Do not look into the touch unit's laser diffusion ports.
This could cause injury to eyesight. Extra care should be taken when children are present.
Do not view the laser light using optical devices such as a magnifying glass within a range of 2.75 inches
(70 mm).
Viewing at close range could cause injury to eyesight.
Connect the touch unit to BrightLink 1480Fi/1480Fi+/1485Fi/1485Fi+ models only. Do not connect it to any
other projectors or devices.
Do not use the touch unit if you are using or are near medical equipment such as a pacemaker.
The magnet within the touch unit generates electromagnetic interference which could cause medical equipment
to malfunction.
Caution
Do not install the wall mount in a location where the operating temperature for your projector model may
be exceeded. Such an environment may damage the projector.
Install the wall mount in a place free from excessive dust and humidity to prevent the lens or optical
components from becoming dirty.
Do not use excessive force when adjusting the wall mount.
The wall mount may break, resulting in personal injury.
Keep magnetic storage media (for example, magnetic cards or electronic devices such as computers,
digital watches, or cell phones) away from the touch unit.
The magnet within the touch unit generates electromagnetic interference which could corrupt data or cause the
media or device to malfunction.
4

Advertisement

Table of Contents
loading

Table of Contents