Adjust The Vertical Slide Position Of The Arm - Epson ELPMB62 Installation Manual

F

Adjust the vertical slide position of the arm

1. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount (
hexagonal shaft at the top of the wall mount (
alignment mark on the wall plate as shown below (
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it (
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it (
2. Secure the wall mount with the M6 × 20 mm hexagon shoulder bolt.
). Start by aligning the notch on the arm with the
).
40
), or the
).
).