Epson ELPMB62 Installation Manual page 87

6. Adjust the projector position so that the corner markers are completely within the highlighted areas in
the corners of the image.
7. Tighten any adjustment dials and screws that you previously loosened.
Warning
Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal
injury or property damage.
8. Open the front cover (
9. Use the focus lever to adjust the focus (
10. After you finish making the adjustment, close the front cover.
11. Press the [Enter] button on the remote control or control panel to begin the adjustment.
Once the adjustment is complete, you can use the Quick Corner setting to make further adjustments.
Using the Arc Correction or Point Correction options will reset your previous adjustments.
).
).
87