Installation Of The Software Samples; Installation Under Dos; Installation Under Windows 3.11 And Windows Nt/Xp/2000/98; Fig. 6-7: Installation Of The Samples - Addi-Data ADDINUM CPCI-1500 Technical Description

Technical description
6.3

Installation of the software samples

6.3.1

Installation under DOS

The software samples for DOS are automatically installed with the driver.
6.3.2

Installation under Windows 3.11 and Windows NT/XP/2000/98

- Change to the CD drive. The files for the required samples are to be found as
follows:
- Select the required programming language.
- Start the set-up program "setup.exe" (double click)
- Select one of the 3 parameters
1- typical:
2- compact:
3- custom:
Proceed as indicated on the screen and read attentively the "Software License"
and "Readme". In "custom", you can select your operating system.
The installation program gives you further instructions.
Chapter 6

Fig. 6-7: Installation of the samples

all files are installed (Samples, source code and exe files).
only the source code is installed.
you can select which files are to be installed.
APCI-/CPCI-1500
23