Addi-Data ADDINUM CPCI-1500 Technical Description page 26

Technical description Chapter 6 APCI-/CPCI-1500
Access:
Selection of the access mode for the ADDI-DATA digital boards.
Access in 8-bit or 16-bit.
PCI bus/device/(slot):
Used PCI slot. If the board is no PCI board, the message "NO" is displayed.
Interrupt:
Used interrupt of the board. If the board uses no interrupt, the message "Not
available" is displayed.
DMA:
Indicates the selected DMA channel or "Not available" if the board uses no DMA.
More information:
Additional information like the identifier string (e.g.: PCI1500-50) or the installed
COM interfaces.
Text boxes:
Under the table you will find 6 text boxes in which you can change the parameters of
the board.
Base address name:
Description of the used base addresses for the board.
Select a name though the pull-down menu. The corresponding address range is
displayed in the field below (Base address).
Interrupt name:
Description of the used IRQ lines for the board.
Select a name though the pull-down menu. The corresponding interrupt line is
displayed in the field below (Interrupt).
DMA name (for ISA board only):
When the board supports 2 DMA channels, you can select which DMA channel is to
be changed.
DMA channel (for ISA board only):
Selection of the used DMA channel.
17