I_Apci1500_Triggercounter3; I_Apci1500_Watchdog; I_Apci1500_Readtimercounter1 - Addi-Data ADDINUM CPCI-1500 Technical Description

APCI-/CPCI-1500

13) i_APCI1500_TriggerCounter3 (...)

Syntax:
<Return value> = i_APCI1500_TriggerCounter3
Parameters:
BYTE
Task:
Triggers the third counter. The start value is loaded in the counter.
Return value:
0: No error
-1: The handle parameter of the board is wrong
-2: The counter has not been initialised
-3: The counter/watchdog has been initialised as a watchdog.
Please use function "i_APCI1500_InitWatchdogCounter3"

14) i_APCI1500_Watchdog (...)

Syntax:
<Return value> = i_APCI1500_Watchdog
Parameters:
BYTE
Task:
Triggers the watchdog. The start value is loaded in the watchdog.
Return value:
0: No error
-1: The handle parameter of the board is wrong
-2: The watchdog has not been initialised
-3: The counter/watchdog has been initialised as a counter.
Please use function "i_APCI1500_InitWatchdogCounter3"

15) i_APCI1500_ReadTimerCounter1 (...)

Syntax:
<Return value> = i_APCI1500_ReadTimerCounter1
Parameters:
BYTE
PLONG
Task:
Reads the current value of the first counter/timer if used as a counter or reads the
timer content if used as a timer.
92
b_BoardHandle
b_BoardHandle
b_BoardHandle
pl_ReadValue
Technical description
Handle of the xPCI-1500
(BYTE b_BoardHandle)
Handle of the xPCI-1500
Handle of the xPCI-1500
This parameter has two meanings.
When the counter/timer is used as a
counter, it returns the current value of the
counter.
When the counter/timer is used as a timer,
it returns the current value of the timer.
Chapter 9
(BYTE b_BoardHandle)
(BYTE b_BoardHandle,
PLONG pl_ReadValue)