Connecting A Dcp Telephone To An Mm312, Mm712, Or Mm717 Media Module - Avaya G350 Installing And Upgrading

Connecting a DCP telephone to an
MM312, MM712, or MM717 media module
Note:
For a full list of supported phones, see Appendix B, Supported Avaya telephones
Note:
in Overview for the Avaya G250 and Avaya G350 Media Gateways, 03-300435.
1. Wire a telephone port to a DCP port on the G350.
The following media modules provide DCP telephone ports:
- MM312. 24 DCP ports
- MM712. Eight DCP ports
- MM717. Twenty four DCP ports, provided via a single 25-pair amphenol socket on the
front panel. To connect the MM717 media module to a punch down block to enable
telephone connection, see
modules
Figure 16: The MM312 media module
Figure 17: The MM712 media module
Figure 18: The MM717 media module
Connecting devices to the MM717 and MM716 media
on page 54.
Step 1: Connecting data and voice devices
Issue 7 November 2009 51