Avaya G350 Installing And Upgrading page 34

Installing the Avaya G350 Media Gateway
Figure 6: Inserting the S8300 Server
5. Apply firm pressure to engage the connectors.
The connector has pins of different lengths. The long pins engage first to provide
grounding. Medium length and short pins provide power and signal.
6. Lock the S8300 Server module into the chassis by tightening the spring-loaded captive
screws on the front of the module.
If you are installing an S8300B, replace the plate labelled "Remove before removing or
inserting S8300 module" between slots V1 and V2 and tighten the screws on the front of
the plate.
7. After you have inserted the S8300 Server module, if applicable, insert the rest of the media
modules. Make sure to insert each module in a permissible slot.
!
DANGER :
To prevent access to electrical hazards by unauthorized personnel and to ensure
DANGER:
continued compliance to radiated emissions requirements, all captive screws
must be securely tightened such that they cannot be loosened without the use of
a tool.
34 Installation and Upgrades for the Avaya G350 Media Gateway