Avaya G350 Installing And Upgrading page 73

Note:
You must add the LSP server correctly to the Main CM Server.
Note:
2. If valid translations are not file synchronized to the LSP, do the following:
a. From a SAT session run from the primary controller, verify that the LSP node-name
and IP address are correctly entered.
b. Use the save translation lsp command to start the file synchronization process.
c. Log in again to Avaya Aura Communication Manager from the LSP and list either
stations or trunks.
d. Verify that the list of stations or trunks is valid.
3. Disconnect the G350 from the primary controller, ensuring that all telephones are still
connected or have network connectivity to the G350.
4. Verify that calls can be made between local telephones using the locally connected outside
lines to the G350.
Note:
See also "Auto Fallback for H.248 Gateways" in Administering Network
Note:
Connectivity on Avaya Aura™ Communication Manager, 555-233-504 and the
Migrate H.248 MG to primary" screen command in Avaya Aura™ Communication
Manager Screen Reference, 03-602878.
Step 1: Testing the installation
Issue 7 November 2009 73