Upgrading G350 Firmware Using Avaya Installation Wizard (Iw) - Avaya G350 Installing And Upgrading

Upgrading G350 firmware using Avaya Installation Wizard
(IW)
For a G350 with an S8300C/D installed, you can use Avaya IW to upgrade G350 firmware. You
can run Avaya IW from a remote location if the software is loaded locally. You can point your
browser to the IP address of the S8300C/D if you are in the customer network or via the modem
connection.
Note:
To upgrade the Avaya CM software use the Software Upgrade Manager (see the
Note:
Avaya Software Update Manager User Guide, 14-300168).
1. Prepare installation worksheets. See
2. Place the upgrade software and firmware files on a laptop. These files are on the Avaya
Aura Communication Manager CD-ROM. To upgrade the G350 firmware, insert the
Communication Manager CD-ROM into a CD-ROM drive connected to a laptop.
Alternatively, you can upload the individual files to the hard drive of the laptop. For more
details, see Job Aid: Avaya Installation Wizard, 555-245-754.
Note:
The CD-ROM may not contain the latest firmware. Check the Avaya Support
Note:
website for the latest firmware versions and compare these with the versions in
the directory. If the CD-ROM does not contain the latest versions, download the
latest versions from the Avaya Support website to the laptop.
3. Connect the laptop to the services port of the S8300 Server.
4. Access Avaya IW. See Job Aid: Avaya Installation Wizard, 555-245-754.

Upgrading G350 firmware using Avaya Installation Wizard (IW)

Preparing installation worksheets on page 87.
Issue 7 November 2009 85