Document Revision History - Carrier VVT Bypass II Installation And Startup Manual

Document revision history

Document revision history
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date Topic
1/25/19 Specifications
12/17/18 Wiring the VVT Bypass II for power > To
wire the controller for power.
Mounting the VVT Bypass II > To mount
the controller and actuator
8/28/18 Wiring the TruVu™ ET Display to the
Rnet port
Specifications
* For internal use only
VVT Bypass II Controller
Installation and Start-up Guide
Change description
Added surge CAUTION to Protection specification.
Added photograph of lifting up the cover.
Added caution stating that you must use the bushing, O-ring, and
screws that are shipped with the VVT Bypass II, along with
applicable graphic.
New topic.
Added TruVu™ ET Display to Rnet port
Added first paragraph to Protection specification.
46
Code*
X-TS-AK-E-CC
X-H-RE-E-CC-JS
X-H-RE-E-CC-JS
C-D
C-H-JS-O
CARRIER CORPORATION ©2019
All rights reserved