I/O Points - Carrier VVT Bypass II Installation And Startup Manual

Appendix A: VVT Bypass II Points/Properties

I/O Points

Navigation: i-Vu® / Field Assistant:
Point Name/Description
Pressure Input – The current duct static pressure of the controller's integrated airflow
sensor.
SAT Sensor – The current duct air temperature sensor that is physically connected to
the controller.
AO Output – The current voltage on the controller's VFD/ACT output terminal.
VVT Bypass II Controller
Installation and Start-up Guide
Properties I/O Points
>
44
Range
R:
0 to 2.0 in. H O
2
(0 to .498 kPa
R: -56 to 245°F
(-48.9 to 118.3°C)
R: 0 to 10 Vdc
CARRIER CORPORATION ©2019
All rights reserved