Troubleshooting - EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual

MESSAGE PROBLEM
Shut-down due to exceeding
HO7
maximum smoke temperature
Switching OFF due to excessive
H08
overheating of the product
Shut down due to gear motor
H09
breakage or seizure
Switching OFF due to circuit
H10
board overheating
Switching OFF due to the inter-
H11 vention of the safety pressure
switch
Room
H12
failure.
Shut-down due to breakage of
H13 the reading water temperature
probe of the boiler stove
Shut-down due to breakage of
H14 the water temperature probe in
the boiler
Shut-down due to exceeding
H15 maximum water temperature in
the boiler stove
Shut-down due to breakage of
the pressure switch for reading
H16
water pressure of the boiler
stove
Shut down due to breakage of
H17
external probe
Shut-down due to breakage of
H18 the water temperature probe in
the accumulator tank

TROUBLESHOOTING

SOLUTION
•
•
•
•
•
•
•
temperature probe
•
•
•
•
•
•
•
USER/INSTALLER
Check the type of pellet (contact the technician if in
doubt)
contact the technician
see HO7
Contact the technician
Contact the technician
Ensure the stove and flue are clean
Contact the technician
Contact the technician
Contact the technician
Contact the technician
Contact the technician
Contact the technician
Contact the technician
Contact the technician
39