Table of Contents
Advertisement
Available languages
Available languages
POSSIBLE TROUBLESHOOTING
In the event of problems the INPELLET 54 stops automatically and runs the shutdown process and the display
shows text regarding the motivation of the shutdown (see the various alarms below).
Never pull the plug during shutdown on account of malfunction.
Should it block, to restart the insert you will need to allow the turn-off procedure to take place (600 seconds with
audible signal), and then press the button
Do not turn the stove on again before checking the cause of the malfunction and CLEANING/ EMPTYING the crucible.
INDICATION OF POSSIBLE CAUSES OF MALFUNCTION AND INDICATIONS AND REMEDIES:
1) Verific./air flow:
Also check that the flow sensor limits are within the parameters.
2) Verific./extract.:
3) Stop/Flame:
4) Block_FI/NO Start:
The flame has NOT appeared
5) Black Out:
6) Fault/RC:
7) smoke °C/high:
8) Check button:
.
The flame has appeared but after the wording Ignition,
the wording Block_FI/NO Start has appeared.
33
Advertisement
Table of Contents
