EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual page 30

To set the temperature setpoints ("TEMP" on
the display), from the Crono function, press the "OK"
button. The following screen will appear.
Scroll to "TEMP" (underlined) using the "+/-" buttons.
Press the "OK" button to confirm and select "TEMP".
Press the "M" button to go back to the previous screen.
press the "OK" button to enter the "I TEMP" function.
ENABLE
TEMP
CHANGE
SET
The Crono has three adjustable setpoints: T1, T2 and
T3 (screens below).
Press the "OK" button to switch between the setpoints.
Use the "+" and "-" buttons to set the desired
temperature setpoint for each level.
T1 must always be lower than T2 and T2 than T3: if you
try to set a T1 temperature that is greater than T2, T1
temperature will automatically match T2.
30
To continue with other changes, press the "OK"
button.
To choose between exit without saving and save,
press the "M" button.
The following screen will appear.
TEMP
CHANGES?
USER INSTRUCTIONS
"+/-" scroll
buttons
"OK" button to
confirm
TEMP
"+/-" buttons to
set the desired
temperature
"OK" button to
scroll (switch
to the next
temperature)
Press "M" to exit
without saving
Press "OK" to
SAVE
save and go back
to the screen
To combine one of the three temperatures
to a time period ("SET" on the display), from the
Crono function, press the "OK" button. The following
screen will appear.
Scroll to "SET" (underlined) using the "+/-" buttons.
Press the "OK" button to confirm and select "SET".
Press the "M" button to go back to the previous screen.
press the "OK" button to enter the "SET" function.
ENABLE
TEMP
CHANGE
SET
The first page (below) allows you to choose whether to
apply the same Crono configuration for 7/7 days, 5/7,
weekend only or day by day.
SET
USER
"+/-" scroll
buttons
"OK" button to
confirm
"+/-" scroll
buttons
"OK" button to
confirm