By the remote control you can:
•
Switch from OFF to ON modes, by
pressing and holding the ON/OFF button
•
Set the desired room temperature with
the +/- buttons (see below)
In default mode, with the product connected to the power supply, press the ON/OFF button on
the display to "activate" the boiler stove and adjust the desired room temperature with the +/-
buttons. The boiler stove will switch on and off and will adjust its power automatically to keep the
set temperature.
•
To change the fan setting.
Press "OK" in the main screen.
The bottom of the display will show the fan icon with the numbers reporting the fan speed.
You can:
• modify the setting with the "+/-" buttons
• save the changes with the "OK" button. This returns you to the main screen.
USER INSTRUCTIONS
40°
1
5
USER
Switching on and off will take a few minutes,
during which the flame must appear or go
off. Just wait without taking any action.
During ignition, the display shows the text
"START".
During switch-off, the display shows the text
"OFF".
27