EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual page 36

MAINTENANCE
DAILY MAINTENANCE
1. manually pull/push for 3/4 times the turbulator knob, located at the top right-hand side (A)
(A)
2. Open the combustion chamber door (P)
3. Remove the grille (B)
4. Remove the two-part burning pot (C)
5. Remove the ash tray (D)
6. Empty the ash tray and burning pot into a non-flammable container (the ashes may still contain embers and/or
hot parts) or vacuum them once they are cold. Vacuum the interior of the combustion chamber, the bed, and the
compartment around the burning pot into which the ash falls.
36
7. Scrape the burning pot with the provided scraper and clean out any obstructed holes.
8. If necessary, clean the glass (when cold) using a suitable product (e.g. Glasskamin), which your dealer should have.
(B)
(C)
(D)
(P)
USER/INSTALLER