EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual page 31

The second screen (accessible by pressing the "OK"
button from the first screen) allows you to set the start
and end time of the time period matching the chosen
temperature setpoint (T1,T2 and T3).
The set temperature is shown in the middle of the
clock.
This is done in steps of 30'. The ignition times are
indicated by the fact that the dots are black. In zones
with white dots, the appliance is OFF
The setting screen is the following.
FROM 06:00
TO
TEMP T1
Press the "+/-" buttons to change the switch-on time.
Hold the button down to scroll through the times more
quickly.
Press the "OK" button to confirm and go to the end
time setting.
Press the "+/-" buttons to change the switch-off time.
Hold the button down to scroll through the times more
quickly.
Press the "OK" button to confirm and go to the
temperature selection (T1, T2 or T3).
Press the "+/-" buttons to switch between the
temperatures
To continue with other changes, press the "OK"
button.
To choose between exit without saving and save,
press the "M" button.
The following screen will appear.
7 DAYS
SAVE
CHANGES?
USER INSTRUCTIONS
7 DAYS
08:00
19
Press "M" to exit
without saving
Press "OK" to
save and go back
to the screen
USER
To view/change the settings ("CHANGE" on
the display), from the Crono function, press the "OK"
button. The following screen will appear.
Scroll to "CHANGE" (underlined) using the "+/-"
buttons.
Press the "OK" button to confirm and select
"CHANGE".
To go back to the previous screen press the "M" button.
CHANGE
7 DAYS
5 DAYS
WEEKEND
DAY
RESET
From the "CHANGE" function, in addition to changing/
viewing the "7 DAYS", "5 DAYS", "WEEKEND", "DAY"
programming, you can erase all time settings
using the "RESET" function
RESET
CANCEL ALL THE
TIME
SLOTS?
NO
YES
Use the "+/-" buttons to switch between YES and NO
Press the "OK" button to continue with other changes
NOTE
When the Crono function is enabled, press the On/
Off button to switch on/off the product outside the
programmed times.
This causes the deactivation of the crono function.
Follow the instruction in the paragraph Crono to re-
enable the Crono function.
"+/-" scroll
buttons
"OK" button to
confirm
31