Table of Contents
Advertisement
FIRST IGNITION (COMMISSIONING)
PHASES
•
Make sure you have read and understood this
manual.
•
Remove all flammable materials from the appliance
(manuals, labels, etc.). In particular remove any
labels from the glass.
•
Make sure that the technician performs the first
ignition and the first loading of the pellet tank.
Refer to the "Various Menus" chapter, paragraph
"pellet loading".
On first ignition, there may be a slight
smell of paint, which will disappear in a
short time.
FUEL
Use UNI EN ISO 17225-2 category A1 wood pellets
or similar regulatory products with the following
characteristics.
diameter 6 mm
length 3-4 cm
humidity <10 %
For reasons of safety and environmental compatibility,
DO NOT burn plastic, painted wood, coal, bark or
20
other such materials in the stove.
Do not use the stove as an incinerator.
Caution
Using fuels other than those specified can
damage the appliance
VENT
During normal operations the vent is
automatic. The need for a manual vent for
the system can only be assessed by the
technician during commissioning.
USER INSTRUCTIONS
LOADING THE PELLETS INTO THE TANK
Load the pellets from the right-hand or left-hand hatch,
as decided during the installation phase.
USER
Hide quick links:
Advertisement
Table of Contents
