EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual page 22

Wood pellet boiler-fireplace
Table of Contents

Advertisement

REMOTE CONTROL
Characteristics:
RF transceiver module, frequency 2.4 GHz Powered
by two AAA 1.5 V batteries rated at least 1200 mAh.
Risk of explosion if the batteries are replaced
with other batteries of an incorrect type.
BUTTONS
The remote control has 5 buttons
ON/OFF button
manual on/off button and for switching the remote
from energy saving mode to active heating.
+/-: to increase/decrease the set values or scroll
between the Menu options
M: menu key / relax mode key
OK: confirm key, switches to the next setting and
between automatic and manual modes.
NOTES
The remote control exchanges information with
the logic board (including room temperature
sensing in automatic mode) every 2' and when it
is activated by pressing the ON/OFF button.
In normal use, the remote control's batteries
should last a year. This is an approximate value,
since it depends on both the type of batteries and
22
the intensity of use. Edilkamin and the reseller
will not consider claims for battery life under any
circumstances. If the battery charge is low, a
warning displays at the top left (see the paragraph
on "If problems arise").
THE
SIGNAL
CONTROL TO THE PRODUCT IS
CONFIRMED
SIGNAL.
IF THE AUDIBLE SIGNAL DOES
NOT SOUND, THIS MEANS THE
BUTTON
BRIEFLY.
USER INSTRUCTIONS
TRANSMISSION
OF
FROM
THE
REMOTE
BY
AN
AUDIBLE
WAS
PRESSED
POWER SAVING If it is not used, the display will
go black after 20", as the power saving mode is
automatically activated. The display turns black
without text. This only refers to the remote control, not
the product itself.
To activate it, press ON/OFF.
DO NOT PRESS THE ON/OFF BUTTON
REPEATEDLY; otherwise in manual mode,
you may inadvertently switch the product
on and off.
REMOTE CONTROL POWER
Otherwise the remote control will
not work.
THE
If at the first switch-on operation the lan-
guage is not set, the adjacent language selection
screen will appear.
Select the language with the +/- keys and confirm
it with OK. You are now asked to confirm or set the
Time and Date. Set the values with the +/- keys and
TOO
confirm with OK. The day of the week is calculated
automatically using a perpetual calendar.
USER
O N / O F F
button
Open the bottom of the remote control
and insert the 2 batteries in the way
indicated.
Supply mains power to the product.
WHEN YOU HEAR THE AUDIBLE
SIGNAL, PRESS THE ON/OFF
BUTTON

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents