EdilKamin IDROPELLBOX 30 Installation, Use And Maintenance Manual page 34

Setting the
("TEMPERATURE" on the display)
Allows you to set the boiler temperature and the
accumulator temperature. If the external probe is
active, it allows you to set the climatic curve instead of
the boiler temperature.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing the "OK" button.
Choose the option with the "+/-" buttons, press "OK"
to change the setting
You can set the water temperature in the boiler stove
(BOILER on the display)
In presence of external probe, the water temperature
is automatically calculated according to the outside
temperature. You can set the curve as shown in the
34
figure at the side (CURVE on the display)
In presence of accumulator tank, you can set its
temperature as shown in the figure at the side (PUFFER
on the display)
The domestic hot water boiler is set as shown at the
side (BOILER on the side of the display)
USER INSTRUCTIONS
water Temperature
STAND BY
CRONO
TEMPERAT
CARICO PLT
LANGUAGE
BEEP
DATE-TIME
INFO
TECHNICAL
MENU
USER
BOILER
70°C
44°C
PUFFER
65°C
44°C