Table of Contents
Advertisement
Setup GUI – AUDIO PROCESSOR – Output
The Output block allows you to use a True Peak limiter, Mute and Attenuate the output signals from the
DSP, do a mono conversion for stereo channels and add delay. This may be set independently for both the
voice and the program channel.
Link
Limiter
Max True Peak (dBTP)
Processing Profile
Output
Mute
Attenuation (dB)
Mono
Output Delay Coarse (ms)
Output Delay Fine (samples) [0 ... 2000]
If the voice channel mode is set to stereo SYSTEM > Setup > Voice Channel Mode = Stereo
a mono circuit will be available for the voice channel as well.
[Unlinked / Linked]
[On / Off]
[-20.0 ... 0.0]
[0 / 1 Live / 2 Speech / 3 Pop / 4 Uni
5 / 6 Classic / 7 / 8 / 9]
[On / Off]
[On / Off]
[-80.0 ... 0.0]
[L/R Stereo / L+R Mono / L/L Mono / R/R Mono]
[0 ... 2000]
42
V*AP
Advertisement
Table of Contents
