Setup Gui - Audio Processor - M/S - junger V*AP Manual

V*AP
Input
Mute
Input Gain (dB)
Mono
Input HPF (Hz)
Input LPF (Hz)
Input Delay Coarse(ms)
Input Delay Fine (samples) [0 ... 2000]
Setup GUI – AUDIO PROCESSOR – M/S
The M/S block allows transformation of the voice channel signals from L/R to M/S and vice versa.
The M (mid) and S (side) signals may be processed to change the stereo width from 0% (mono)
to100% (stereo) to 200% (excess width).
[Enable / Disable]
Enables or disables the input section
[On / Off]
[-80.0 ... 0.0 ... 20.0]
[L/R Stereo / L+R Mono / L/L Mono / R/R Mono]
[OFF / 20 / 40 / 80 / 120]
[OFF / 15 / 20 / 22]
[0 ... 2000]
M/S
Swap V1 and V2
M/S Encode
Stereo Width (%)
M/S Decode
29
[On / Off]
Turns the M/S block on and off
[On / Off]
[On / Off]
[0 ... 100 ... 200]
[On / Off]