Table of Contents
Advertisement
Setup GUI – INTERFACES – AES I/O
Input Status
Input Sample Rate Converter
The AES input has a status detection that may show :
PCM, Non PCM (e.g. Dolby encoded signal) or
Fail (no carrier, unlock, cranky [too much jitter]).
The non PCM status will be retrieved from a logical combination of
the Validity flag and the channel status.
If one of the inputs is not assigned by the ROUTING section, its
status will not be incorporated into the System Status.
For asynchronous sources it is possible to turn a SRC on.
If a SRC is turned on and the input status becomes Non-PCM, the
SCR will be turned off automatically in order to maintain the original
data structure of the encoded bit stream like Dolby E.
20
V*AP
Advertisement
Table of Contents
